V5.5.5 ------ 1> Tweaked path algorithm for new paradigm Now generically detects the network; Supports TRACEn-n,WIDEn-n,SSn-n etc 2> Fixed the backspace in the telnet interface "telnet localhost 8020" 3> Fixed a bug which stopped the 'exclude specific stations' from DX alerts working properly V5.5.4 ------ 1> Fixed a bug which caused DX spots not to be displayed on the map within UI-Path32 V5.5.3 ------ 1> Fixed a bug which caused Lat/Long to be removed V5.5.2 ------ 1> Added DX Spot Rig Control (Auto radio tune on RX (or Double click DX Spot List) of DX Spot) 2> Fixed a bug related to house keeping of dx spots V5.5.1 ------ 1> DX Spot List now supports 250 spots 2> Added go bottom button to DX list 3> Route map not re-drawing when map was changed 4> Band stats added to dx list V5.5.0 ------ 1> New Feature: DX Spot Support - DX Spot are now captured from RF or Direct Internet DX Cluster Connection - Spots are plotted (using maidenhead information) on either UI-View32 or UI-Path32 - List DX Spots via telnet interface (command DXSPOTS) - List DX Spots via Action -> DX Spot List - Configure via Setup -> DX Spot Setup Note for a line to be drawn between the spotter and spotted station there needs to be maidenhead information for both stations V5.4.7 ------ 1> fixed the odd heard direct tx table large value problem again... 2> stations list now saved every hour V5.4.4 ------ 1> fixed the odd heard direct tx table large value problem V5.4.0 ------ Important!! this update requires you delete stations.bin after installing the upgrade. 1> Added DX triggering colours to the TX table in further information 2> Added moderate and strong totals to the UI-Path32 Live webpage. 3> Updated Online Help. V5.3.15(F) ------ Important!! this update requires you delete stations.bin after installing the upgrade. 1> Fixed some issues around the triggering of the DX app 2> Altered the routine to housekeep the transmission tables V5.3.14(E) ------ Important!! this update requires you delete stations.bin after installing the upgrade. 1> Added the ability to set thresholds to trigger the DX alerts. 2> Added the ability to exclude certain stations triggering the DX alerts 3> Fixed a bug which was corrupting the uipath.out file 4> Change the run dx application to only trigger when the station is heard direct 5> Fixed a bug which caused the DX applications to not run when UI-Path32 was minimised to the systray 6> Put a duplicate check in to stop x amount of DX application events firing when the trigger packet is relayed around the local digipeaters 7> Added a transmission table showing the number of times a station is heard direct (Inspired by James - VE6SRV). This functionality has been added to Further Information, UI-Path Live and telnet interface. 8> Updated uipathlive.template to include the new placeholder for the stations direct transmission table V5.3.3 ------ 1> Added some extra bits to the help file V5.3.2 Beta ----------- 1> Added On-Line Help V5.3.1 Beta ----------- 1> Improved the access routes algorithm 2> Changed the file layout of the access routes save function V5.3.1 Beta ----------- 1> Fixed bug in APRS message parser 2> Fixed bug in station list 3> Fixed a bug which would cause third party traffic when "exclude IGATE traffic" was unticked in AGW mode to appear as heard direct V5.3.0 Beta ----------- 1> Load database function now loads significantly quicker 2> The stations list now refreshes quicker 3> Optional FindU lookup for when posit is unknown. V5.2.8 Beta ----------- 1> Added some additional icons to the toolbar 2> Added a communication watchdog timer. If enabled and no data is received after 30 minus. UI-Path32 will attempt to re-connect to the APRS data source 3> Clear all stations added to the action menu 4> You can now highlight a station in the station list and by pressing delete it will be removed from the station list 5> The station list is now saved when UI-Path32 if exited. This means you can re-start UI-Path32 without loosing your station list 6> Station Find will now output to UI-View32 V5.2.6 Beta ----------- 1> Realtime plot and digipeater route now show unknown paths between stations using the colour choose in setup -> output display which is different to stations where the position is known 2> Telnet server is now multi user V5.2.5 Beta ----------- 1> Added expire after x hours for station lists. Default's to 24 hours. 2> Added a reset telnet connection under the action menu 3> Re-Worked the maintain database routine 4> Filtered out generic APRS aliases from the database search routine. This was causing some paralell lines in the realtime plot to appear. V5.2.4 Beta ----------- 1> Added comment field to the station list V5.2.3 Beta ----------- 1> Improved the performance on close down (saving the database) 2> Improved the performance of searching the uipath database 3> Added a DETAIL command to the telnet server 3> Added a PROPS command to the telnet server V5.2.2 Beta ----------- 1> Added ability to monitor Multiple Digi Coverages at the same time V5.2.1 Beta ----------- 1> Updated the toolbar to reduce the real estate used 2> Fixed an issue with the traffic monitor 3> Heard direct algorithm modified to to cope with certain TRACEn-n digipeater paths. A scernario exists where the digipeater sofware can not insert the callsign due to the maximum of 8 digi's already being in the AX25 frame. This can lead to UI-Path32 thinking some stations have been heard direct when they have not. 4> Added a PATHS command to the telnet serve V5.2.0 ***None Beta*** ------ 1> Tweaked the code so if you run the relaltime plot in output on UI-View32 with UI-Path32 minimised it no longer grabs the focus of other windows V5.1.2 Beta ----------- 1> Fixed a bug which caused the callsign not to be displayed on the realtime map (output on ui-view32 not selected) 2> Fixed a bug which caused blank lines to appear in the stations list when using the realtime map (output on ui-view32 not selected) with AGW comms mode 3> Fixed a bug which would cause a blank realtime route map to appear when swopping between output on UI-View32 and none output on UI-View32 in a realtime mode context V5.1.1 Beta ----------- 1> Fixed a bug which was causing duplicates in the digi coverage list V5.1.0 Beta ----------- 1> Fixed a bug with the digi coverage file format "Subscript error" 2> Fixed a bug which caused the main screen to go windowed from maximised V5.0.9 Beta ----------- 1> Fixed a bug when selecting which stations to view the heard direct plot from access routes 2> Fixed a bug which sometime happened when doing the above 3> Fixed a bug which caused "Invalid property value" when doing realtime plots with output on ui-view32 not ticked V5.0.7 Beta ----------- 1> Fixed a bug when viewing the tx transmissions table from the menu (broke in 5.0.6) 2> UI-Path32 now closes in response to the close event from UI-View32 3> As an alternative to FTP there now is a copy to UNC path (for uipathlive.*) function. This is added mainly for those running UI-Webserver 4> Certain useful Window positions are now saved 5> The is now a new setting which when selected will stop any windows maximising V5.0.6 Beta ----------- 1> Sort orders (last heard, crow distance, callsign) added to the output on the uipathlive webpage and the UI-Path32 telnet interface 2> The DX status of a particular station heard direct is highlighted (either green,orange,red) on the uipathlive webpage 3> Telnet mh command now shows the DX status (Normal, Moderate or Strong) 4> Monitor Digi Coverage is now saved/loaded from a .cov file on a per digi by digi basis (example mb7ut.cov) 5> uipathlive.template file has been updated to allow 2 to work (note the styles added in). V5.0.5 Beta ----------- 1> New propagation alert system for your web page. Take a look at Setup -> Propagation alerts 2> The line controls have been removed in favour of a central set-up menu. 3> UI-View32 users can now have there selected map in UI-View32 automatically incorporated into UI-Path32. Tick Options -> Output on UI-View32 4> RELAY is now filtered out of the heard lists 5> displaying of the callsigns on UI-View32 is now switcheable 6> Ability to filter out objects from the lists has been added 7> Options -> Realtime it's ticked or not is now saved to the ini file 8> Minimise to sys tray added 9> Findu.com hyperlinks added to UI-Path Live web page V5.0.1 to V5.0.2 ---------------- Bug: 1> Introduced a bug whilst fixing the dx cluster problem, now have fixed that bug V5.0.0 to V5.0.1 ---------------- Bug: 1> Fixed password encyption, this update will require you to re-enter your password on the setup screen 2> Fixed a problem with UI DX Cluster frames which caused odd distances V4.9 to V5.0 -------------- Features: 1> Digi coverage can now be saved as an overlay file for use in UI-View 2> Realtime plot will now show multiple paths. This means you can now see the spread of multiple paths from a given station within about 2/3 seconds time frame. 3> Live export of data to your website enable and put a link to uipathlive.htm 4> Output to UI-View32 now enabled for every communication type except UI-View (16bit) 5> Revamped station list you can now resize the grid columns 6> Setup from UI-View32 added to aide the set-up process 7> UI-Path32 now starts-up minimised Bug Fix: 1> Paths in the station list where loosing commas when monitoring digi coverage 2> Fixed long standing status text truncation problem 3> IGATE filtering works again V4.8 to V4.9 ------------ Features: 1> Facility to plot graphically the coverage of a specified digipeater V4.5 to V4.8 ------------ Bug Fix: 1> Very occasional Crashing on access routes is now fixed (blank callsign sympton) 2> Duplicate UI-messages no longer stored 3> Runtime Error 5 caused in database code now fixed V4.4 to V4.5 ------------ Features: 1> Telnet facility for easy remote access to the data contained in UI-Path32. Default port 8020 V4.0 to V4.4 ------------ Features: 1> InterNet communication type added. This will allow you to connect UI-Path32 direct to internet APRS servers, UI-View local server and PSK31 Server and any other applications which adhear to the APRS INET spec. 2> UI-Path32 can automatically cycle through digipeater route maps and stations heard maps. Bug Fixes: 1> Corrected network route mesh and improved the visualisation of the displayed route hubs 2> Fixed a problem which stopped output to UI-View32 from working. 3> Heard direct time and packet frame information was always the first received rather than the most recent received V3.8 to V4.0 ------------ Features: 1> End digi used as an indication of a station heard direct. For example G7AAA Via G7BBB* then you get a packet which has G7CCC Via G7AAA* from this you can interpret that you have heard G7AAA direct 2> View option added to switch off toolbar and status bar for more screen space. 3> UI-Path32 can if you want auto save (on the hour) that days TX table in a pipe delimited format which can be imported in programs like excel 4> Change to the further information screen to allow the last heard direct packets to be displayed 5> Snapshot can be taken now of Heard Direct, Propagation and DX Broadcast beacons 6> Further Information has had a face lift (requires TABCTL32.OCX on your system, this will be provided in the full install) 7> Network Mesh and Heard Direct diagrahm added to window menu Bug Fixes: 1> Fixed a problem which caused a path to look like WIDE7,*,* 2> Tweaks to wide code which now resolves all known problems with stations being heard direct when they should not 3> Fixed a major problem with digipeater path parsing that effected people using the AGW communication method V3.6 to V3.7 ------------ Features: 1> Exporting can now be found under the file menu and you can now export the current station list to a UI-View compatible overlay file 2> Stations Heard can now be sorted by clicking the above coloumn label. Refresh brings it back into chronological order Bug Fixes: 1> I have re-written the logic which deals with routes which have WIDEx-x in it. This should alleviate some routes appearing to have been digied less than they really have 2> Fixed an occasional Error 13 crash. Caused by corrupted dx beacons V3.5 to V3.6 ------------ Features: 1> Highlighting any part of the transmissions table copies the data into the clipboard for pasting into e-mail/notepad etc 2> A feature which calculated the return path to a station has been added back in. If after seeing the route to you want the return path just click on the route in the line control and it will be copied into the clipboard Bug Fixes: None. V3.4 to V3.5 ------------ Features: 1> UI-Path32 now keeps track off when it hears stations over a 24 hr period. This allows changes in propagation to be tracked more easily with the ability to see distant stations appear and then disappear as the propagation returns to normal Bug Fixes: None. V3.3 to V3.4 ------------ Features: None. Bug Fixes: 1> Corrected a problem which stopped overlayed objects from being decoded V3.2 to V3.3 ------------- Features: 1> Action -> Station Find Function Searches database or uses supplied Maidenhead locator and displays on map Bug Fixes: None. V3.1 to V3.2 ------------ Features: None. Bug Fixes: 1> Shrinking the map windows right up caused UI-Path32 to crash 2> Maps did not work in French International Settings causing station to be displayed in the top left corner 3> Maidenhead locators were given precendence over lat/lon 4> The occasional problem which caused errors 53 and 70 when loading maps is finally fixed